GC Impreceed Alginate Powder Impression Material is a high-precision, non-chromatic alginate designed for detailed dental impressions. Its dust-free formulation enhances user experience, allowing for quick and easy mixing.
With a normal working and setting time, Impreceed is ideal for creating removable prostheses, study models, and antagonists for both fixed and removable applications. The material exhibits rapid water absorption, resulting in a smooth, bubble-free mix within 20 seconds.
GC Impreceed provides excellent dimensional stability and elastic properties, ensuring accurate reproduction of dental anatomy. Impressions can be stored for an extended period before pouring casts, making it a convenient choice for dental professionals. The setting times may vary based on water temperature and quality.
Features:
- Ideal for orthodontic models, study models, temporary crowns and bridges, and antagonist models in both fixed and removable prostheses.
- Impreceed provides a balance of good drip resistance and fluidity to effectively provide coverage enabling detailed impression-taking with minimal discomfort to the patient.
- Impreceed has good compatibility with hard stones producing smooth and precise detail reproduction on the gypsum model.
- The innovative formulation minimizes dust during mixing, enhancing safety and user comfort while maintaining a clean workspace.
- Provides ample time for manipulation, making it suitable for a range of dental procedures without rushing.
- Offers flexibility, making it easier to remove impressions from patients while ensuring they retain their detailed shape.
Key Specifications:
-
Category: Impression Material
-
Type: Alginate Powder
-
Setting Type: Normal
-
Mixing Time: 20-30s
-
Working Time: 90s
-
Minimum Time in Mouth: 120s
-
Setting Time: 180s
-
Compressive Strength: 0.7 MPa
-
Strain in Compression: 14.6%
-
Recovery From Deformation: 97.4%
Packaging:
- 1 x 454 gm GC Impreceed Alginate Powder Impression Material
Direction To Use:
-
Preparation: Gather all necessary materials, including GC Impreceed alginate powder, a clean mixing bowl, a spatula and water.
-
Measure Water: Use distilled water at room temperature (approximately 23°C) for optimal results.
-
Add Powder: Measure the appropriate amount of GC Impreceed powder based on the desired volume of the impression.
-
Mixing: Gradually add the alginate powder to the water while stirring continuously with the spatula. Mix for about 20 seconds until a smooth, homogenous, and bubble-free consistency is achieved.
-
Loading the Tray: Immediately load the mixed alginate into the impression tray, ensuring it fills the tray evenly.
-
Taking the Impression: Position the tray in the patient's mouth and hold it steady for the recommended setting time (usually a few minutes, based on product specifications). Ensure the material fully sets before removal to maintain impression accuracy.
-
Removing the Impression: Gently lift the impression tray from the mouth, using a slight rocking motion to avoid distortion.
-
Storage: If not pouring immediately, store the impression in a moist environment (e.g., in a sealed plastic bag) to prevent drying out.
-
Cleaning: Clean all mixing tools and trays promptly after use to prevent material from hardening on surfaces.
-
Final Steps: Pour the dental cast as soon as possible for best results, following any specific instructions provided for your application.
Note: Higher temperatures of the mixing water will shorten the setting time and total working time.
-
- Variations in hardness of the water may influence the setting time.
Caution: In case of contact of material or mixture with eyes, immediately flush with water and seek medical attention.
-
- When using material, wear a dust mask to avoid inhaling powder dust.
- After opening, transfer the contents into a container for exclusive use of the material.
- Do not mix with any other product.
- In rare cases, the product may cause sensitivity in some people. If any such reactions are experienced, discontinue the use of the product and refer to a physician.
